Get to know us!
We are Canada’s leading manufacturer when it comes to tackling the covid crisis by supplying hand sanitizers, alcohol free sanitizers and cleaners and disinfectants to businesses, governments, corporations, hospitals and many other entities. Located in Scarborough, we provide products that contribute to people’s safety and help prepare and protect against germs, bacteria and much more.
Superfast Product Delivery System
Clean your hands, Protect your health.
Alcohol- Free Hand sanitizer
Working with Health Canada, Enviro Med has created an alcohol-free, Benzethonium Chloride–based sanitizer that kills 99.9% of bacteria.
Benzethonium Chloride is a wide spectrum ammonium antibacterial compound that is an effective sanitizing agent. The antibacterial compound works by killing microorganisms and inhibiting their future growth, and for this reason it has become the core ingredient for the most effective alcohol-free hand sanitizers.
Benzethonium Chloride sanitizers kill 99.9% of germs and are just as effective as alcohol -based sanitizers.
Provides protection well after the solution has dried, unlike alcohol-based sanitizers.
Benzethonium Chloride sanitizers do not dehydrate skin like alcohol-based sanitizers. Aloe provides additional moisturization.
Non-flammable and less toxic than alcohol-based sanitizers if accidentally ingested.
All-Purpose Cleaner and Disinfectant
Our All-Purpose Cleaner and Disinfectant eliminates viruses, bacteria, soap scum, and tough grease.
Kills 99.9% of viruses and bacteria
Cuts through tough grease and soap scum
Provides long lasting freshness
Can be used on hard, non-porous surfaces in the kitchen, bathroom and other areas of the home
- Kills 99.9% of viruses and bacteria
- Cuts through tough grease and soap scum
- Provides long lasting freshness
- Can be used on hard, non-porous surfaces in the kitchen, bathroom and other areas of the home
Turn nozzle to desired position.
To Refill: Remove trigger sprayer. Pour in product from refill container and
To Clean / Deodorize: Spray surface until thoroughly wet. Wipe with a clean cloth or sponge. No rinsing required.
To Clean Soap Scum and Greasy Soil: Allow product to sit to penetrate soil before wiping clean. Repeat if necessary.
To Sanitize / Disinfect: Preclean surface. Spray surface until thoroughly wet.
To Sanitize: Leave for 10 seconds before wiping.
To Disinfect:Leave for 2 minutes before wiping. Rinse all food contact surfaces with water after use.
Hand Sanitizer Original
Enviromed Med Alcohol Wipes- 75% Alcohol
- Convenient use with easy open and close air tight seal to prevent leaking and drying out
- Saturated with 75% isopropyl alcohol for optimum anti-bacterial properties
- For effective cleansing and disinfection
SECTION 2: HAZARD(S) IDENTIFICATION
Signal Word: Danger
GHS C lass: Flammable Liquid, Category 3 Eye Irritant, Category 2
Specific Target Organ Toxicity, Single Exposure, Category 3
Hazard Statements: Flammable liquid and vapor Causes serious eye irritation
May cause drowsiness or dizziness
Precautionary Statements: Keep away from heat/sparks/open flames — No smoking.
Take precautionary measures against static discharge.
In case of fire: Use dry chemical, carbon dioxide to extinguish small fires. Use water for large fires. Wear protective gloves/protective clothing/eye protection.
Avoid breathing mist/vapors/spray.
Store in a well-ventilated place. Keep container tightly closed.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
IF ON SKIN (or hair): Remove /Take off immediately all contaminated clothing. Rinse in/with water/shower. Dispose of contents/container in accordance with Local, State, Federal and Provincial regulations.
Emergency Overview: Danger. Flammable. Irritant. May cause drowsiness or dizziness Pulmonary aspiration Hazard if swallowed. Route of Exposure: Eyes Skin Inhalation Ingestion
Potential Health Effects:
Eye: Eye contact with product or vapors may result in irritation, redness, and blurred vision. May cause pain disproportionate to the level of irritation to eye tissues. Vapor may cause eye irritation experienced as mild discomfort and redness. May cause moderate corneal injury.
Skin: May cause irritation. Repeated exposure may cause a burning sensation and dryness or cracking. Prolonged skin contact is unlikely to result in absorption of harmful amounts.
Inhalation: Inhalation of vapors, fumes or mists of the product may be irritating to the respiratory system. Excessive exposure (400 ppm) may cause eye, nose and throat irritation. Higher levels may cause incoordination; confusion, hypotension, hypothermia, circulatory, collapse, respiratory arrest, and death may follow a longer duration and higher levels. In confined or poorly ventilated areas, vapors can readily accumulate and cause unconsciousness and death.
Ingestion: May cause irritation. Ingesting large amounts m a y cause injury. May cause central nervous system depression, nausea and vomiting. Aspiration of material into the lungs can cause chemical pneumonitis which can be fatal.
Chronic Health Effects: Prolonged or repeated contact may cause skin irritation. Repeated or prolonged inhalation may cause toxic effects.
Signs/Symptoms: Overexposure may cause headaches and dizziness. Signs and symptoms of excessive exposure include facial flushing, low blood pressure, and irregular heartbeats.
Target Organs: Eyes, Skin, Respiratory system, Digestive system.
None generally recognized.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient Percent 70 by Vo lume
EC Number 200-661-7
SECTION 4: FIRST AID MEASURES
Eye Contact: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Skin Contact: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention.
Inhalation: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
Ingestion: If swallowed, do NOT induce vomiting. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.
SECTION 5 : FIRE FIGHTING MEASURES
Flash Point: 23 °C (73 °F) Auto Ignition Temperature: 399 °C (750 °F)
Lower Flammable /Explode size Limit:
Upper Flammable /Explode size Limit:
2.0 % by volume
12.0 % by volume
Extinguishing Media: Use alcohol resistant foam, carbon dioxide, dry chemical, or water fog or spray when fighting fires involving this material. Unsuitable Media: Do not use a solid water stream as it may scatter and spread fire.
Protective Equipment: As in any fire, wear Self-Contained Breathing Apparatus (SCBA), MSHA/NIOSH (approved or equivalent) and full protective gear. Unusual Fire Hazards: Material burns with an invisible flame.
Hazardous Co mbustion Byproducts:
Universal Fire and Explosion Hazards:
Oxides of carbon, oxides of nitrogen and other organic substances maybe formed.
Vapors are heavier than air and may travel along the ground or maybe moved by ventilation to locations distant from the point of material handling or release.
NFPA Health 1
NFPA Flammability 3
NFPA Reactivity 0
SECTION 6: ACCIDENTAL RELEASE MEASURES
Personnel Precautions: Evacuate area and keep unnecessary and unprotected personnel from entering the spill area. Avoid breathing vapor, aerosol or mist. Avoid contact with skin, eyes and clothing.
Environmental Precautions: Avoid run off into storm sewers, ditches, and waterways.
Methods for containment: Contain spills with inert absorbent material such soil, sand, or oil dry.
Methods for cleanup: Remove all sources of ignition. Absorb or wipe any residual liquid. Place in a suitable container for proper disposal. Use appropriate protective apparel as described in Section 8. Avoid contact with skin and eyes.
SECTION 7: HANDLING and STORAGE
Handling: Use with adequate ventilation. Avoid breathing vapor and fumes. Use only in accordance with directions. To reduce potential for static discharge, bond and ground containers when transferring material.
Storage: Store in a cool, dry, well-ventilated area away from sources of heat, combustible materials, direct sunlight, and incompatible substances. Keep container tightly closed when not in use. Keep away from aldehydes, halogenated organics, halogens, strong acids, and strong oxidizers.
Hygiene Practices: Wash thoroughly after handling. Avoid inhaling vapors, mists, or fumes.
SECTION 8: EXPOSURE CONTROLS, PERSONAL PROTECTION – EXPOSURE GUIDELINES
Engineering Controls: Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. W here such systems are not effective wear suitable persona l protective equipment, which performs satisfactorily and meets OSHA or other recognized standards. Consult with local procedures for selection, training, inspection and maintenance of the personal protective equipment.
Eye /Face Protection: Tightly fitting safety goggles. Wear a face shield also when splash Hazard exist.
Hand Protection Description:
Wear appropriate protective gloves. Consult glove manufacturer’s data for permeability data. Preferred glove materials include: polyethylene, neoprene, chlorinated polyethylene, natural rubber (latex), polyvinyl chloride (PVC or vinyl), nitrile/butadiene rubber (nitrile or NBR), ethyl vinyl alcohol laminate (EVAL). Avoid gloves made of poly vinyl alcohol (PVA).
Respiratory Protection: Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Comply with the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149 Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection.
Guideline ACGIH: TLV-TWA: 200 ppm TLV-STEL: 400 ppm
Guideline OSHA: P EL-TW A: 400 ppm
SECTION 9: PHYSICAL and CHEMICAL PROPERTIES
Physical State Appearance: Liquid
Odor Threshold: Not determined.
Boiling Point: 82 – 89°C (180 – 192 °F)
Melting Point: Soluble in water
Specific Gravity: 0.872 @ 20°C (68°F)
Solubility: Not determined.
Vapor Density: 43.0 hPa (32 m m Hg) @ 20°C (68°F)
Percent Volatile: 100%
Evaporation Rate: Not determined.
pH: Not determined.
Viscosity: Not determined.
Coefficient of Water/Oil Distribution:
Flash Point: 23 °C (73 °F) Auto Ignition Temperature: 399 °C (750 °F)
SECTION 10: STABILITY and REACTIVITY
Chemical Stability: Stable under normal temperatures and pressures. Hazardous Polymerization: Not reported.
Conditions to Avoid: Keep away from heat, ignition sources and incompatible materials.
Incompatible Materials: Aldehydes, halogenated organics, halogens, strong acids, strong oxidizers.
SECTION 11: TOXICOLOGICAL INFORMATION
Eye: Eye – Rabbit standardized test.: 100 mg Eye – Rabbit standardized test.: 10 mg
Eye – Rabbit standardized test.: 100 mg/24H (RTECS)
Skin: Administration onto the skin – Rabbit Standard Draizetest.: 500 mg
Administration onto the skin – Rabbit LD50: 12800 mg/kg [Details of toxic effects not reported other than lethal dose value] (RTECS)
Inhalation: Inhalation – Rat LC50: 16000 ppm/8H [Details of toxic effects not reported other than lethal dose value]
Inhalation – Mouse LC50: 53000 mg/m3 [Behavioral – General anesthetic Lungs, Thorax, or Respiration – Other changes] Inhalation – Rat LC50: 72600 mg/m3 [Behavioral – General anesthetic Lungs, Thorax, or Respiration – Other changes] (RTECS)
Ingestion: Ingestion: Oral – Rat LD50: 5045 mg/kg [Behavioral – Altered sleep time (including change in righting reflex) Behavioral – Somnolence (general depressed activity)]
Oral – Mouse LD50: 3600 mg/kg [Behavioral – Altered sleep time (including change in righting reflex) Behavioral – Somnolence (general depressed activity)]
SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity: No ecotoxicity data was found for the product.
Environmental Fate: No environmental information found for this product.
Ecotoxicity: LC50; Species: 1400000 ug/L for 48 hr Crangon (Common Shrimp) LC50; 10000000 ug/L for 24 hr Species: Daphnia magna (Water Flea) LD50; >5000 mg/L for 24 hr Species: Carassiusauratus (goldfish)
LC50; 11,130 m g/L for 48 hr Species: Pimephalespromelas (fathead minnows) Environmental Fate: Isopropanol is expected to have very high mobility in soil.
Bioaccumulation: Bioconcentration in aquatic organisms is low.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal: Consult with the US EPA Guide lines listed in 40 CFR Part 261.3 for the classifications of Hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guide lines, if applicable, to ensure compliance. Arrange disposal in accordance to the EPA and/or state and local guide lines.
Contaminated Packaging: Do not reuse containers without proper cleaning or re conditioning.
SECTION 14: TRANSPORT INFORMATION
DO T Shipping Name: Flammable Liquid, n.o.s. (Isopropanol) Limited quantity DO T Hazard Class: 3
DOT Packing Group: III
IATA Shipping Name: Flammable Liquid, n.o.s. (Isopropanol) IATA Hazard C lass: 3
IATA Packing Group: III
IMDG UN Number: UN1993 (Limited quantity)
IMDG Shipping Name: Flammable Liquid, n.o.s. (Isopropanol) Limited quantity IMDG Hazard Class: 3
IMDG Packing Group: III
SECTION 15: REGULATORY INFORMATION
Canada WHMIS: Controlled – Class B2 Flammable Liquid Controlled – Class D2B Toxic
Isopropyl Alcohol TSCA Inventory Status: Canada DSL:
EC Number: WHMIS Pictograms:
SECTION 16: ADDITIONAL INFORMATION
HMIS Health Hazard: 1
HMIS Fire Hazard: 3
HMIS Reactivity: 0
HMIS Personal Protection: X
Get In Touch With Us